Effects of energy storage systems grid code requirements on interface protection performances in low voltage networks

The ever-growing penetration of local generation in distribution networks and the large diffusion of energy storage systems (ESSs) foreseen in the near future are bound to affect the effectiveness of interface protection systems (IPSs), with negative impact on the safety of medium voltage (MV) and low voltage (LV) systems. With the scope of preserving the main network stability, international and national grid connection codes have been updated recently. Consequently, distributed generators (DGs) and storage units are increasingly called to provide stabilizing functions according to local voltage and frequency. This can be achieved by suitably controlling the electronic power converters interfacing small-scale generators and storage units to the network. The paper focuses on the regulating functions required to storage units by grid codes currently in force in the European area. Indeed, even if such regulating actions would enable local units in participating to network stability under normal steady-state operating conditions, it is shown through dynamic simulations that they may increase the risk of unintentional islanding occurrence. This means that dangerous operating conditions may arise in LV networks in case dispersed generators and storage systems are present, even if all the end-users are compliant with currently applied connection standards

Characterization of coagulase-negative staphylococcal isolates from blood with reduced susceptibility to glycopeptides and therapeutic options

<p>Abstract</p> <p>Background</p> <p>Coagulase-negative staphylococci (CoNS) are a major cause of nosocomial blood stream infection, especially in critically ill and haematology patients. CoNS are usually multidrug-resistant and glycopeptide antibiotics have been to date considered the drugs of choice for treatment. The aim of this study was to characterize CoNS with reduced susceptibility to glycopeptides causing blood stream infection (BSI) in critically ill and haematology patients at the University Hospital Tor Vergata, Rome, Italy, in 2007.</p> <p>Methods</p> <p>Hospital microbiology records for transplant haematology and ICU were reviewed to identify CoNS with elevated MICs for glycopeptides, and isolates were matched to clinical records to determine whether the isolates caused a BSI. The isolates were tested for susceptibility to new drugs daptomicin and tigecycline and the genetic relationship was assessed using f-AFLP.</p> <p>Results</p> <p>Of a total of 17,418 blood cultures, 1,609 were positive for CoNS and of these, 87 (5.4%) displayed reduced susceptibility to glycopeptides. Clinical review revealed that in 13 cases (7 in haematology and 6 in ICU), CoNS with reduced susceptibility to glycopeptides were responsible for a BSI. <it>Staphylococcus epidermidis </it>was the causative organism in 11 instances and <it>Staphylococcus haemolyticus </it>in 2. The incidence of oxacillin resistance was high (77%), although all isolates remained susceptible to linezolid, daptomycin and tigecycline. Fingerprinting of CoNS identified one clonal relationship between two isolates.</p> <p>Conclusion</p> <p>Multi-resistant CoNS with reduced susceptibility to glycopeptides, although still relatively infrequent in our hospital, are emerging pathogens of clinical concern. Surveillance by antibiotyping with attention to multi-resistant profile, and warning to clinicians, is necessary.</p

Effects of average power factor management in distribution systems with dispersed generation

Electrical systems are inevitably affected by power losses, mainly due to the current flowing through lines and transformers. Currents depend on end-users' power absorption and are strictly related to the overall power factor, resulting from loads, compensating units and distributed generation. The power factor management has a great influence on network power losses and voltage profiles along distribution lines. In the past, before the distributed generation diffusion, the network losses minimization could be obtained by requiring a high average power factor to end-users, evaluating the parameter on the bill period. Differently, nowadays the power factor management for active users is requiring different rules, since the previous statement is no longer valid. The paper investigates inconsistences between local generation and present power factor requirements in the Italian context. Considerations about sizing compensating devices are introduced, in accordance with the recent evolution of connection codes. Losses are compared considering different reference power factors, local generation amount and generators' connection topologies. Results are verified basing on data from meters installed in distribution networks

Ground Fault Temporary Overvoltages in MV Networks: Evaluation and Experimental Tests

Single-phase-to-ground faults may cause substantial temporary overvoltages (TOVs) in large radial medium-voltage networks with isolated neutral, even over 3-p.u. phase to ground. Resonant neutral earthing limits these overvoltages to 1.8 p.u. but credible earthing apparatus failures might trigger TOVs up to 2.4 p.u. This paper presents the ground fault study of an Italian 20-kV ENEL Distribuzione network. Analytical evaluations in a wide parametric range of neutral earthing arrangements, include isolated neutral and ENEL resonant earthing with parallel resistance, as evidence of 2.4-p.u. TOVs with isolated neutral, 1.8 p.u. with resonant earthing, and more than 2.0 p.u. with partial compensation. Recordings of ground faults staged in the same network are presented, showing excellent agreement between analytical predictions and experimental test. The tests confirm TOVs of more than 2.3 p.u. with isolated neutral, sometimes evolving into cross-country faults (possibly explaining unforeseen cable fault rates), and the effectiveness of the ENEL neutral earthing practices in suppressing these TOVs

Combined effects of distributed generation grid code requirements on the transient behaviour of islanded systems

National and internationals grid codes define the connection rules for passive and active users, guaranteeing the electrical power system stability and safety. Recently, the increasing diffusion of Distributed Generators from Renewable Energy Sources, mainly interfaced through electronic converters, has called for a drastic review of traditional approaches to distribution network operation. As a consequence, new regulating functions, aiming to support network stability by regulating local units power flows, have been defined, and others are under investigation. The paper discusses the role of existing and proposed stabilizing actions in terms of unintentional islanding identification, according to the Low Voltage interface protection characteristics

Impact of distributed generation grid code requirements on islanding detection in LV networks

The recent growing diffusion of dispersed generation in low voltage (LV) distribution networks is entailing new rules to make local generators participate in network stability. Consequently, national and international grid codes, which define the connection rules for stability and safety of electrical power systems, have been updated requiring distributed generators and electrical storage systems to supply stabilizing contributions. In this scenario, specific attention to the uncontrolled islanding issue has to be addressed since currently required anti-islanding protection systems, based on relays locally measuring voltage and frequency, could no longer be suitable. In this paper, the effects on the interface protection performance of different LV generators’ stabilizing functions are analysed. The study takes into account existing requirements, such as the generators’ active power regulation (according to the measured frequency) and reactive power regulation (depending on the local measured voltage). In addition, the paper focuses on other stabilizing features under discussion, derived from the medium voltage (MV) distribution network grid codes or proposed in the literature, such as fast voltage support (FVS) and inertia emulation. Stabilizing functions have been reproduced in the DIgSILENT PowerFactory 2016 software environment, making use of its native programming language. Later, they are tested both alone and together, aiming to obtain a comprehensive analysis on their impact on the anti-islanding protection effectiveness. Through dynamic simulations in several network scenarios the paper demonstrates the detrimental impact that such stabilizing regulations may have on loss-of-main protection effectiveness, leading to an increased risk of unintentional islanding